日语
English
Français
Русский
Español
Português
عربي
Waste tires are not useless and can only become garbage. On the contrary, they have very high recycling value. Through the tire recycling production line, we can recycle the steel wire and rubber parts of the tire, which have high economic value and are widely used. The tire steel wire can be sold directly to the recycling station, and the rubber part can be processed into rubber blocks, rubber particles and rubber powder, and further processed into rubber products.
Working Process:
We have two types of the tires bead wire puller, single puller and double puller.
The tires bead wire puller is used for completely pull out the inner bead wire of the tire at one time. Its purpose is to facilitate subsequent crushing or cutting.
Features:
1. It adopts the integral bottom plate, which is the most efficient wire drawing equipment on the market.
2. It adopts the structure of double transmission and double hooks, which can pull out the steel wires on both sides of the tire at the same time, and the efficiency is 3 times that of the single hook wire drawing machine.
3. Mechanical transmission, and the pull hook adopts a disc structure, which occupies a smaller area.
4.Automatic circuit protection system and a safety protection bracket.
The Tires Shredder is a powerful machine which can crush the steel wire radial tires into rubber blocks of about 50*50mm. It is used to crush and remove waste tires with steel wire rings.
Features:
The blade is shredded by knife, and after subsequent special heat treatment, it has high hardness and high wear resistance, which solves the problem of difficult replacement, difficult repair and high cost of blade wear, effectively improving maintenance time and reducing labor intensity.
After shreddering, the rubber blocks needs to be transported by the conveyor belt.
